Cisco

There are 2 methods to start a Conference call:

Starting a new Conference call

1. Make an outgoing call to the 1st party and wait until they have answered the call.

2. Press the ‘conf’ Soft Key. The call is placed on hold, a new Line is opened and you will hear a dial-tone.

3. Make an outgoing call to the 2nd party.

4. Either while the call is ringing, or after it has been answered, press the ‘conf’ Soft Key to join both parties and start the Conference call.

Note: When you hang up, both of the other parties will also be disconnected.

Joining a new call with a held call

You need to have at least 1 call on hold to use this method.

1. Make an outgoing call to the 2nd party.

2. Either while the call is ringing, or after it has been answered, press the ‘confLx’ SoftKey.

- If you only have 1 call on hold, both parties will be joined and the Conference call will begin.

- If you have 2 or more calls on hold, you will be asked to select the held line that you wish to use. Press the Line Key that contains the held call that you wish to use, and the Conference call will begin.

Note: When you hang up, both of the other parties will also be disconnected.